Anyone know if any company supplies custom made decals for rods?
You can do them yourself if you own an inkjet printer.
https://hobby.uk.com/clear-decal-paper-sheet-1.html
I do, thanks for that. :8)
Sorry, that was the wrong link- that was for laser printers- the inkjet link is here-
https://hobby.uk.com/clear-decal-paper-sheet.html
There are various products to soften the decal to make it conform to the countours of the surface on which the decal is to be place, but I doubt you will need that for a rod. Anyway they are just acetic acid so vineagar will do.
Other products will "set" the decal, hardening it. These might be worth investigating - website as above search "Microsol"- as the rod is liable to get wet. The decals will accept a covering of spray lacquer to protect them.
https://www.mudhole.com/supplies-rod-building/accessories-supplies/decals-stickers-accessories/custom-rod-decals
got some from here a few years back ,need to coat with varnish /epoxy resin.
Garry
Found some on ebay. :D
You have probably found this but here you go.
https://www.ebay.co.uk/itm/192908653525
Bit expensive though
America is your best bet.
Tight LInes
Thanks Alan